First, an overview
This instrument can simulate mobile phone and other products, imitate the repeated seat pressure life test, take certain hardness aluminium rod as pressure head, drive by cylinder, adjust a certain pressure of 17kg, measure the degree of damage after reaching the number of times. Meet YD/T 1539-2006 standard. The mobile handset is unpacked and equipped with matching batteries to turn on and lock the keyboard face up. The fuselage and the fixing bracket are vertically placed in the axial direction of the round bar aluminum extrusion head with a length of 12 cm. The sample is extruded 1000 times per minute at a frequency of 15-30 times per minute. The function, appearance and assembly shall be in accordance with the relevant requirements. Standard requirements. A folding, sliding and rotating handheld machine should be tested under its closing condition.
Two, technical parameters
1. test maximum sample: 200cm*10cm, adjustable in height 4cm.
2. use electric control.
3. working frequency: 10~60 times / min.
4. calibration device, pressure sensor 100kg
5. alarm time: 5-10 seconds (fixed)
6. pressure head requirements: the use of round bar aluminum
7. machine size: about 650*430*500mm
8. weight: 40kg
9. power supply: AC220/50HZ